Products


    Products

    Home > Products
    SS1050

    General Description

    The SS1050 is a uni­polar Hall-effect sensor IC fabricated from bipolar technology. The device integrates a voltage regulator, reverse battery protection diode, Hall sensor with dynamic offset cancellation system, temperature compensation circuitry, small signal amplifier, Schmitt trigger and an open-collector output to sink up to 25 mA. With suitable output pull up, they can be used with bipolar or CMOS logic circuits.

    Features and Benefits

    4.5V to 24V Operation

    -40°C to 150°C Superior temperature operation

    Bipolar technology

    Open-collector 25 mA output

    Reverse battery protection

    Small Size-SOT23 3L or SIP 3L

    Solid-state reliability

    Resistant to physical stress

    Activate with small, commercially available Permanent magnets

    Application Examples

    Automotive, Consumer and Industrial

    Solid-state switch

    Brushless DC motor commutation

    Speed detection

    Angular position detection

    Linear position detection

    Proximity detection

    Packages

    3 pin SOT23 (suffix SO)

    3 pin SIP (suffix UA)

    Detail Datasheet

     SS1050_UN_BI_N.pdf

     

    Copyright © 2024, SEC Electronics. All rights reserved